What is the process of visual phototransduction and how does it work?

Visual phototransduction is the process by which light is converted into electrical signals in the retina, allowing us to see images and perceive the world around us. This complex process involves a series of biochemical reactions that occur in specialized cells known as photoreceptors. In this article, we will explore the steps of phototransduction and how it enables us to have clear and accurate vision. From the absorption of light by photoreceptors to the transmission of signals to the brain, we will delve into the intricate workings of this essential process. Understanding phototransduction is crucial for comprehending how we see and the various factors that can affect our visual perception.

The Visual Cycle. hν = Incident Photon

 

Visual phototransduction is the sensory transduction of the visual system. It is a process by which light is converted into electrical signals in the rod cells, cone cells and photosensitive ganglion cells of the retina of the eye. This cycle was elucidated by George Wald (1906-1997) for which he received the Nobel Prize in 1967. It is so called “Wald’s Visual Cycle” after him.

The visual cycle is the biological conversion of a photon into an electrical signal in the retina. This process occurs via G-protein coupled receptors called opsins which contain the chromophore 11-cis retinal. 11-cis retinal is covalently linked to the opsin receptor via Schiff base forming retinylidene protein. When struck by a photon, 11-cis retinal undergoes photoisomerization to all-trans retinal which changes the conformation of the opsin GPCR leading to signal transduction cascades which causes closure of cyclic GMP-gated cation channel, and hyperpolarization of the photoreceptor cell.

Following isomerization and release from the opsin protein, all-trans retinal is reduced to all-trans retinol and travels back to the retinal pigment epithelium to be “recharged”. It is first esterified by lecithin retinol acyltransferase (LRAT) and then converted to 11-cis retinol by the isomerohydrolase RPE65. The isomerase activity of RPE65 has been shown; it is still uncertain whether it also acts as hydrolase. Finally, it is oxidized to 11-cis retinal before traveling back to the rod outer segment where it is again conjugated to an opsin to form new, functional visual pigment (rhodopsin).

 

Photoreceptors

The photoreceptor cells involved in vision are the rods and cones. These cells contain a chromophore (11-cis retinal, the aldehyde of Vitamin A1 and light-absorbing portion) bound to cell membrane protein, opsin. Rods deal with low light level and do not mediate color vision. Cones, on the other hand, can code the color of an image through comparison of the outputs of the three different types of cones. Each cone type responds best to certain wavelengths, or colors, of light because each type has a slightly different opsin. The three types of cones are L-cones, M-cones and S-cones that respond optimally to long wavelengths (reddish color), medium wavelengths (greenish color), and short wavelengths (bluish color) respectively. Humans have a trichromatic visual system consisting of three unique systems, rods, mid and long-wavelength sensitive (red and green) cones and short wavelength sensitive (blue) cones.

 

Process

 

The absorption of light leads to an isomeric change in the retinal molecule.

 

To understand the photoreceptor’s behaviour to light intensities, it is necessary to understand the roles of different currents.

There is an ongoing outward potassium current through nongated K+-selective channels. This outward current tends to hyperpolarize the photoreceptor at around -70 mV (the equilibrium potential for K+).

There is also an inward sodium current carried by cGMP-gated sodium channels. This so-called ‘dark current’ depolarizes the cell to around -40 mV. Note that this is significantly more depolarized than most other neurons.

A high density of Na+-K+ pumps enables the photoreceptor to maintain a steady intracellular concentration of Na+ and K+.

 

In the Dark

Photoreceptor cells are unusual cells in that they depolarize in response to absence of stimuli or scotopic conditions (darkness). In photopic conditions (light), photoreceptors hyperpolarize to a potential of -60mV.

In the dark, cGMP levels are high and keep cGMP-gated sodium channels open allowing a steady inward current, called the dark current. This dark current keeps the cell depolarized at about -40 mV, leading to glutamate release which inhibits excitation of neurons.

The depolarization of the cell membrane in scotopic conditions opens voltage-gated calcium channels. An increased intracellular concentration of Ca2+ causes vesicles containing glutamate, a neurotransmitter, to merge with the cell membrane, therefore releasing glutamate into the synaptic cleft, an area between the end of one cell and the beginning of another neuron. Glutamate, though usually excitatory, functions here as an inhibitory neurotransmitter.

In the cone pathway glutamate:

  • Hyperpolarizes on-center bipolar cells. Glutamate that is released from the photoreceptors in the dark binds to metabotropic glutamate receptors (mGluR6), which, through a G-protein coupling mechanism, causes non-specific cation channels in the cells to close, thus hyperpolarizing the bipolar cell.
  • Depolarizes off-center bipolar cells. Binding of glutamate to ionotropic glutamate receptors results in an inward cation current that depolarizes the bipolar cell.

 

In the Light

In summary: Light closes cGMP-gated sodium channels, reducing the influx of both Na+ and Ca2+ ions. Stopping the influx of Na+ ions effectively switches off the dark current. Reducing this dark current causes the photoreceptor to hyperpolarise, which reduces glutamate release which thus reduces the inhibition of retinal nerves, leading to excitation of these nerves. This reduced Ca2+ influx during phototransduction enables deactivation and recovery from phototransduction.

 

Representation of molecular steps in photoactivation (modified from Leskov et al., 2000). Depicted is an outer membrane disk in a rod. Step 1: Incident photon (hν) is absorbed and activates a rhodopsin by conformational change in the disk membrane to R*. Step 2: Next, R* makes repeated contacts with transducin molecules, catalyzing its activation to G* by the release of bound GDP in exchange for cytoplasmic GTP, which expels its β and γ subunits. Step 3: G* binds inhibitory γ subunits of the phosphodiesterase (PDE) activating its α and β subunits. Step 4: Activated PDE hydrolyzes cGMP. Step 5: Guanylyl cyclase (GC) synthesizes cGMP, the second messenger in the phototransduction cascade. Reduced levels of cytosolic cGMP cause cyclic nucleotide gated channels to close preventing further influx of Na+ and Ca2+.

 

  1. A light photon interacts with the retinal in a photoreceptor cell. The retinal undergoes isomerisation, changing from the 11-cis to all-trans configuration.
  2. Retinal no longer fits into the opsin binding site.
  3. Opsin therefore undergoes a conformational change to metarhodopsin II.
  4. Metarhodopsin II is unstable and splits, yielding opsin and all-trans retinal.
  5. The opsin activates the regulatory protein transducin. This causes transducin to dissociate from its bound GDP, and bind GTP, then the alpha subunit of transducin dissociates from the beta and gamma subunits, with the GTP still bound to the alpha subunit.
  6. The alpha subunit-GTP complex activates phosphodiesterase or PDE.
  7. PDE breaks down cGMP to 5′-GMP. This lowers the concentration of cGMP and therefore the sodium channels close.
  8. Closure of the sodium channels causes hyperpolarization of the cell due to the ongoing efflux of potassium ions.
  9. Hyperpolarization of the cell causes voltage-gated calcium channels to close.
  10. As the calcium level in the photoreceptor cell drops, the amount of the neurotransmitter glutamate that is released by the cell also drops. This is because calcium is required for the glutamate-containing vesicles to fuse with cell membrane and release their contents.
  11. A decrease in the amount of glutamate released by the photoreceptors causes depolarization of On center bipolar cells (rod and cone On bipolar cells) and hyperpolarization of cone off-center bipolar cells.

 

Deactivation of the Phototransduction Cascade

In light, low cGMP levels close Na+ and Ca2+ channels, reducing intracellular Na+ and Ca2+. During recovery (dark adaptation), the low Ca2+ levels induce recovery (termination of the phototransduction cascade), as follows:

  1. Low intracellular Ca2+ makes intracellular Ca-GCAP dissociate into Ca2+ and GCAP. The liberated GCAP ultimately restores depleted cGMP levels, which re-opens the cGMP-gated cation channels (restoring dark current).
  2. Low intracellular Ca2+ makes intracellular Ca-GAP dissociate into Ca2+ and GAP. The liberated GAP deactivates activated-Transducin, terminating the phototransduction cascade (restoring dark current).
  3. Low intracellular Ca2+ makes intracellular Ca-recoverin-RK dissociate into Ca2+ and recoverin and RK. The liberated RK then phosphorylates the Metarhodopsin II, reducing it’s binding affinity for Transducin. Arrestin then completely deactivates the phosphorylated-metarhodopsin II, terminating the phototransduction cascade (restoring dark current).
  4. Low intracellular Ca2+ make the Ca2+/Calmodulin complex within the cGMP-gated cation channels more sensitive to low cGMP levels (thereby, keeping the cGMP-gated cation channel open even at low cGMP levels, restoring dark current)

In more detail:

GTPase Accelerating Protein (GAP) interacts with the alpha subunit of transducin, and causes it to hydrolyse its bound GTP to GDP, and thus halts the action of phosphodiesterase, stopping the transformation of cGMP to GMP.

In other words: Guanylate Cyclase Activating Protein (GCAP) is a calcium binding protein, and as the calcium levels in the cell have decreased, GCAP dissociates from its bound calcium ions, and interacts with Guanylate Cyclase, activating it. Guanylate Cyclase then proceeds to transform GTP to cGMP, replenishing the cell’s cGMP levels and thus reopening the sodium channels that were closed during phototransduction.

Finally, Metarhodopsin II is deactivated. Recoverin, another calcium binding protein, is normally bound to Rhodopsin Kinase when calcium is present. When the calcium levels fall during phototransduction, the calcium dissociates from recoverin, and rhodopsin kinase is released, when it (what?) proceeds to phosphorylate metarhodopsin II, which decreases its affinity for transducin. Finally, arrestin, another protein, binds the phosphorylated metarhodopsin II, completely deactivating it. Thus, finally, phototransduction is deactivated, and the dark current and glutamate release is restored. It is this pathway, where Metarhodopsin II is phosphorylated and bound to arrestin and thus deactivated, which is thought to be responsible for the S2 component of dark adaptation. The S2 component represents a linear section of the dark adaptation function present at the beginning of dark adaptation for all bleaching intensities.

All-trans retinal is transported to the pigment epithelial cells to be reduced to all-trans retinol, the precursor to 11-cis retinal. This is then transported back to the rods. All-trans retinal cannot be synthesised by humans and must be supplied by vitamin A in the diet. Deficiency of all-trans retinal can lead to night blindness. This is part of the bleach and recycle process of retinoids in the photoreceptors and retinal pigment epithelium.

 

Phototransduction in Invertebrates

Phototransduction process in invertebrates like the fruit fly is different from the vertebrates. PI(4,5)P2 cycle underlies the phototransduction process. Here, light induces the conformational change into Rhodopsin and converts it into meta-rhodopsin. This helps in dissociation of G -protein complex. Alpha sub-unit of this complex activates the PLC enzyme (PLC-beta) which hydrolyze the PIP2 into DAG. This hydrolysis leads to opening of TRP channels and influx of calcium.

Scroll to Top